Hello, trying to get the E1 working, but get error on trying to connect the E1 to the pri interface. Have latest firmware, set Mexico as country, also tried ETSI, also tried configuring while all interfaces on shutdown, in different order, through GUI, etc, and nothing gets us past this error. how can we resolve this? below is the config and some command sequence at the end of it, thanks in advance for any feedback, looks like a great site, so far have been able to configure everything and already placed testcalls using the analog line, updated to latest firmware, etc purely on this knowledge base, better than all others I've experienced so far, thanks...
NV6355#wr t
Building configuration...
!
!
! ADTRAN, Inc. OS version R10.9.0.E
! Boot ROM version A2.06.B1
! Platform: NetVanta 6355, part number 1200740E1
! Serial number LBADTN1116AC853
!
!
hostname "NV6355"
enable password password
!
!
clock timezone -6-Mexico-City
!
ip subnet-zero
ip classless
ip routing
ipv6 unicast-routing
!
!
domain-proxy
!
!
no auto-config
!
event-history on
no logging forwarding
no logging email
!
no service password-encryption
!
username "admin" password "password"
username "polycomftp" password "password"
!
!
ip firewall
ip firewall stealth
no ip firewall alg msn
no ip firewall alg mszone
no ip firewall alg h323
!
!
!
!
!
!
!
!
!
!
!
no dot11ap access-point-control
!
!
!
!
!
!
!
ip dhcp database local
!
ip dhcp pool "LAN_pool"
network 10.10.10.0 255.255.255.0
dns-server 10.10.10.1
netbios-node-type h-node
default-router 10.10.10.1
tftp-server tftp://10.10.10.1
ntp-server 10.10.10.1
timezone-offset -6:00
option 157 ascii TftpServers=0.0.0.0,FtpServers=10.10.20.1:/ADTRAN,FtpLogin=polycomftp,FtpPassword=password,Layer2Tagging=True,VlanID=2
!
ip dhcp pool "VoIP_pool"
network 10.10.20.0 255.255.255.0
dns-server 10.10.20.1
netbios-node-type h-node
default-router 10.10.20.1
tftp-server tftp://10.10.20.1
ntp-server 10.10.20.1
timezone-offset -6:00
option 157 ascii TftpServers=0.0.0.0,FtpServers=10.10.20.1:/ADTRAN,FtpLogin=polycomftp,FtpPassword=password,Layer2Tagging=True,VlanID=2
!
!
!
!
!
!
!
!
!
!
!
!
!
!
vlan 1
name "Default"
!
vlan 2
name "VoIP"
!
!
interface eth 0/0
ip address 192.168.150.38 255.255.255.0
ip access-policy Public
media-gateway ip primary
no shutdown
no lldp send-and-receive
!
!
interface eth 0/1
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/2
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/3
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/4
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/5
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/6
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/7
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/8
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/9
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/10
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/11
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/12
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/13
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/14
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/15
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/16
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/17
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/18
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/19
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/20
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/21
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/22
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/23
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
interface eth 0/24
spanning-tree edgeport
no shutdown
switchport voice vlan 2
!
!
!
interface gigabit-eth 0/1
no shutdown
switchport mode trunk
!
!
interface gigabit-eth 0/2
no shutdown
switchport mode trunk
!
!
!
!
interface vlan 1
ip address 10.10.10.1 255.255.255.0
ip access-policy Private
media-gateway ip primary
no shutdown
!
interface vlan 2
ip address 10.10.20.1 255.255.255.0
ip access-policy Private
media-gateway ip primary
no shutdown
!
!
interface e1 1/1
tdm-group 1 timeslots 1-31 speed 64
shutdown
!
!
interface pri 1
shutdown
!
!
interface fxs 0/1
no shutdown
!
interface fxs 0/2
no shutdown
!
interface fxs 2/1
no shutdown
!
interface fxs 2/2
no shutdown
!
interface fxs 2/3
no shutdown
!
interface fxs 2/4
no shutdown
!
!
interface fxo 0/1
no shutdown
!
interface fxo 0/2
no shutdown
!
!
isdn-group 1
connect pri 1
!
!
!
!
!
!
!
!
ip access-list standard wizard-ics
remark Internet Connection Sharing
permit any
!
!
ip access-list extended InterVLAN
permit ip 10.10.10.0 0.0.0.255 10.10.20.0 0.0.0.255
permit ip 10.10.20.0 0.0.0.255 10.10.10.0 0.0.0.255
!
ip access-list extended self
remark Traffic to Netvanta
permit ip any any log
!
ip access-list extended SIP
!
ip access-list extended web-acl-3
permit tcp any any eq https log
permit tcp any any eq ssh log
!
!
!
!
ip policy-class Private
allow list self self
allow list InterVLAN
nat source list wizard-ics interface eth 0/0 overload
!
ip policy-class Public
allow list SIP self
allow list web-acl-3 self
!
!
!
ip route 0.0.0.0 0.0.0.0 192.168.150.1
!
tftp server
tftp server overwrite
http server
http secure-server
no snmp agent
ip ftp server
ip ftp server default-filesystem flash
no ip scp server
ip sntp server
ip sntp server send-unsynced
!
!
!
!
!
!
!
!
!
sip
sip udp 5070
no sip tcp
!
!
!
voice feature-mode network
voice forward-mode network
!
!
!
!
!
!
!
!
!
!
!
!
voice codec-list DEF_CODECS
default
codec g711alaw
codec g729
codec g711ulaw
!
voice codec-list G711
codec g711alaw
!
!
!
voice trunk T01 type isdn
description "E1_CLIENTE"
resource-selection circular descending
connect isdn-group 1
no early-cut-through
modem-passthrough
rtp delay-mode adaptive
!
voice trunk T02 type sip
description "salida sip"
sip-server primary 10.120.3.12 udp 5070
transfer-mode local
!
!
voice grouped-trunk SALIDA_A_PROVEEDOR
trunk T02
accept [1-9]XXXXXXX cost 0
accept 01XXXXXXXXXX cost 0
accept 001XXXXXXXXXX cost 0
accept 044XXXXXXXXXX cost 0
accept 045XXXXXXXXXX cost 0
!
!
voice grouped-trunk CLIENTE
trunk T01
!
!
voice user 2205
connect fxs 0/1
first-name "prueba"
last-name "prueba"
password "1234"
sip-authentication password "1234"
codec-list DEF_CODECS
!
!
!
!
!
!
!
NV6355#onf t
% Unrecognized command
NV6355#conf t
NV6355(config)#interface e1 1/1
NV6355(config-e1 1/1)#no shut
NV6355(config-e1 1/1)#
2000.01.05 23:01:44 E1.e1 1/1 No Alarms
2000.01.05 23:01:44 INTERFACE_STATUS.e1 1/1 changed state to administratively up
2000.01.05 23:01:45 INTERFACE_STATUS.e1 1/1 changed state to up
NV6355(config-e1 1/1)#interface pri
% Invalid or incomplete command
NV6355(config-e1 1/1)#interface pri 1
Configuring Existing PRI interface "1".
NV6355(config-pri 1)#no shut
2000.01.05 23:02:19 ISDN.INTERFACE PRI 1 This PRI is not connected to an e1 interface.
NV6355(config-pri 1)#connect
e1 - Use specified E1 with this pri interface
NV6355(config-pri 1)#connect e1
<slot/port> - E1 interface identifier
NV6355(config-pri 1)#connect e1 1/1
tdm-group - Select a tdm-group from the specified t1
NV6355(config-pri 1)#connect e1 1/1 tdm
NV6355(config-pri 1)#connect e1 1/1 tdm-group 1
<cr>
NV6355(config-pri 1)#connect e1 1/1 tdm-group 1
%-------------------------------^
Could not connect t1 tdm-group to pri interface.
NV6355(config-pri 1)#shut
NV6355(config-pri 1)#connect e1 1/1 tdm-group 1
%-------------------------------^
Could not connect t1 tdm-group to pri interface.
NV6355(config-pri 1)#
Turned out the card on slot was E1/WAN (for a data connection) changed to E1/PRI card and was able to finish configuration, and run test calls through E1, no problem...
Turned out the card on slot was E1/WAN (for a data connection) changed to E1/PRI card and was able to finish configuration, and run test calls through E1, no problem...