Hi
Could anyone please provide some AOS ( Adtran 6240 ) configuration examples for setting up TDM routing between FXS and FXO ports ?
We’re setting up a fax machine attached to one of FXS ports on the Netvanta 6240 in order to make outbound calls from this port using the local FXO port
Thank You
Hello and thanks for posting to our forum.
This is a great guide to follow for FXO and FXS functionality. It was written for a TA 900 but it will work for a NV 6240.
https://supportforums.adtran.com/docs/DOC-2617
The only difference may be the port numbers used for the FXS/FXO. Otherwise the config should be identical. Let us know if you have any questions.
Regards,
Geoff
Hello and thanks for posting to our forum.
This is a great guide to follow for FXO and FXS functionality. It was written for a TA 900 but it will work for a NV 6240.
https://supportforums.adtran.com/docs/DOC-2617
The only difference may be the port numbers used for the FXS/FXO. Otherwise the config should be identical. Let us know if you have any questions.
Regards,
Geoff
Hello,
I went ahead and flagged this post as “Assumed Answered.” If any of the responses on this thread assisted you, please mark them as either Correct or Helpful answers with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you still need assistance, please let us know in a reply.
Regards,
Geoff