cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

DHCP Pool Creation

Jump to solution

What are the commands to create a DHCP pool reservation for a single host?

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: DHCP Pool Creation

Jump to solution

Brian,

To create a DHCP pool reservation for a single host, you will need to know the MAC address of the host that will be requesting DHCP. Further reference and examples are available in our "Configuring DHCP in AOS" document.

The commands to set up a single host DHCP pool are below:

1. Create a new DHCP server pool with a name indicative of the host.

    (config)# ip dhcp-server pool <pool name>

2. Identify the host allowed to take the address in the pool by its MAC address:

    (config-dhcp)#: hardware-address <MAC address>

For example:

    (config-dhcp)#hardware-address d2:17:04:91:11:50

3. Specify the IP address for the host. The router automatically assigns the address with its natural

mask. If your organization uses variable-length subnetting, make sure to include the subnet mask or

prefix length for the host’s subnet:

     (config-dhcp)# host <A.B.C.D> <subnet mask | /prefix length>

4. Specify the default gateway:

     (config-dhcp)# default-router <A.B.C.D>

5. Configure other settings such as DNS and WINS servers and a domain name.

6. You can also assign the client a name:

     (config-dhcp)# client-name <name>

     For example: (config-dhcp)#client-name LAN2Switch

Please reply to this thread if you have any further questions or issues.

Thanks,

Noor

View solution in original post

3 Replies
Anonymous
Not applicable

Re: DHCP Pool Creation

Jump to solution

Brian,

To create a DHCP pool reservation for a single host, you will need to know the MAC address of the host that will be requesting DHCP. Further reference and examples are available in our "Configuring DHCP in AOS" document.

The commands to set up a single host DHCP pool are below:

1. Create a new DHCP server pool with a name indicative of the host.

    (config)# ip dhcp-server pool <pool name>

2. Identify the host allowed to take the address in the pool by its MAC address:

    (config-dhcp)#: hardware-address <MAC address>

For example:

    (config-dhcp)#hardware-address d2:17:04:91:11:50

3. Specify the IP address for the host. The router automatically assigns the address with its natural

mask. If your organization uses variable-length subnetting, make sure to include the subnet mask or

prefix length for the host’s subnet:

     (config-dhcp)# host <A.B.C.D> <subnet mask | /prefix length>

4. Specify the default gateway:

     (config-dhcp)# default-router <A.B.C.D>

5. Configure other settings such as DNS and WINS servers and a domain name.

6. You can also assign the client a name:

     (config-dhcp)# client-name <name>

     For example: (config-dhcp)#client-name LAN2Switch

Please reply to this thread if you have any further questions or issues.

Thanks,

Noor

Anonymous
Not applicable

Re: DHCP Pool Creation

Jump to solution

Brian,

I marked the question as "assumed answered" because there were no more follow up questions.

Please, do not hesitate to add additional information to this post if necessary.

Thanks,

Noor

Anonymous
Not applicable

Re: DHCP Pool Creation

Jump to solution

:

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Levi