Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
‎02-03-2018 02:26 PM

how to enable 10gb module speed

I have 18 switches - 1550-48, 1550-24 in a private environment using the NETVANTA 10Gb SFPs (1700485F1) between MDF and IDF, via OM3 Fiber (10GB) but the port speed still shows 1GB?? -

I am also using the Direct Attached Cables (1710484F1) to uplink to switches within the same IDF.

How to enable that speed?

Thank You,

0 Kudos
Reply
1 Reply
Anonymous
Not applicable
‎02-08-2018 11:58 AM

Re: how to enable 10gb module speed

10Gb SFP Fiber connections require 3 things -

  • Must be an ADTRAN SFP+ module or SFP+ Cable
  • Must be running the Extended Maintenance Release Firmware.  ( this has all supported SFP+ information )
  • The configuration of the SFP interface must be set to 10Gb to get these speeds on both sides of the Fiber connection.

Example -

!

interface xgigabit-switchport 0/3

  description uplink

  no shutdown

  switchport mode trunk

  qos trust cos

  speed 10000                  <----------------- Must be set to get 10Gb.  Auto, will not provide this speed.

!

0 Kudos
Accept as Solution Reply