The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

netvanta AP 160 Not working

Jump to solution

Hi,

I have purchased new Netvanta 1335PoE and Netvanta 160 AP, I have configured AP160 with AC 1335. but SSID not showing. Also I have checked in Netvata 1335 switch Control status showing NA and status is showing Unknown. can you please help me in this regards.

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: netvanta AP 160 Not working

Jump to solution

Hi,

I had this same problem and discovered that I needed to update the firmware on the 1335PoE to  R10.8.0 series as it was originally back at 18.03.01.00. In the documentation I found the AC must be at R10.4.0 at a minimum. Hope this helps

View solution in original post

1 Reply
Anonymous
Not applicable

Re: netvanta AP 160 Not working

Jump to solution

Hi,

I had this same problem and discovered that I needed to update the firmware on the 1335PoE to  R10.8.0 series as it was originally back at 18.03.01.00. In the documentation I found the AC must be at R10.4.0 at a minimum. Hope this helps