cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
mgoldey
New Contributor II

Why can't I enable UDP relay on Port 11430?

Jump to solution

Folks:

Can anyone think of a reason I would be preventing from establishing a UDP relay for port 11430 in particular?  The AOS Command Reference Guide says that any port can be specified, and this guide gives an example of a high port:   DHCP Relay and UDP-relay in AOS 

I've had no problem creating a relay on port 9999 or 22222.  But I can't get my unit to accept port 11430 or any of the ports near it, using either the CLI or the web interface: 

fw(config)#ip forward-protocol udp 11429

% ERROR Port Not added

fw(config)#ip forward-protocol udp 11430

% ERROR Port Not added

fw(config)#ip forward-protocol udp 11431

% ERROR Port Not added

fw(config)#ip forward-protocol udp 11432

% ERROR Port Not added

fw(config)#ip forward-protocol udp 11433

% ERROR Port Not added

The web interface simply says: 

Error: Could not add UDP Forward Protocol.

I don't think that there's anything in the running config that involves those ports:

fw#show running-config | include 1143

fw#

The unit just refuses to do, you know, the one thing I want it to.  Anyone have an inkling why?  Thanks.

I'm running Firmware R11.10.1.E

0 Kudos
1 Solution

Accepted Solutions
mgoldey
New Contributor II

Re: Why can't I enable UDP relay on Port 11430?

Jump to solution

This was a bug that has been fixed as of mid June 2016 in the following firmware releases:

R11.10.3.E-Maintenance release (recommended)

R11.11.1

R11.12.1

R12.1.0

View solution in original post

0 Kudos
2 Replies
Anonymous
Not applicable

Re: Why can't I enable UDP relay on Port 11430?

Jump to solution

Mgoldey,

Please open a support ticket so that we can work further with you on this issue.

Thank you,

Donna

mgoldey
New Contributor II

Re: Why can't I enable UDP relay on Port 11430?

Jump to solution

This was a bug that has been fixed as of mid June 2016 in the following firmware releases:

R11.10.3.E-Maintenance release (recommended)

R11.11.1

R11.12.1

R12.1.0

0 Kudos