cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
kikelwvbbts
New Contributor

Performance netvanta 1335 utilizing nat and access-lists

Currently we have netvanta 1335 connected to internet utilizing 7mb/768kb adsl.
The netvanta 1335 is utilizing nat and access-list which means all is punted to processor.

CPU is running at 40 to 50% when circuit is busy

We are think of upgrading circuit to cable wideband of 35mb/2mb

What are the throughput capabilities of 1335 in mbits/sec and packets/sec when all is punted to processor

Trying to figure out what we will have to upgrade to

Thanks

Labels (2)
0 Kudos
1 Reply
Anonymous
Not applicable

Re: Performance netvanta 1335 utilizing nat and access-lists

kikelwvbbts:

Given the varying packet sizes, router configurations, and other variables at play, we don't publish specific throughput numbers - it's just too subjective. However, I can tell you that we do not recommend the 1335 for any application where process-routing would exceed 25Mbps in total.  In your case, 35Mbps down/2Mbps up would total 37Mbps and would exceed our recommended limits. You would be better served to separate the router and switching functions and go with a dedicated router like our NetVanta 3430, which has a recommended limit of 60Mbps.

Regards,

Ronnie Colvin

Adtran Applications Engineering