cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

Having issues making 2 VLANS work on same 1238 switch.

This should be very simple but it isn't working for me.

I am trying to get 2 VLANs setup on a 1238 17.08.02.00

VLAN1 is data and VLAN 2 is for voice.

DHCP is provided to both VLANs by the switch.

Connected to a Watch Guard

Port 1 is VLAN 1 on both the switch and WG

Port 2 is VLAN 2 on Both the Switch and WG

The switch sees the Yeahlink phones via LLDP and I see they are in deed assigned to VLAN 2 (via MAC forwarding table).

I have assigned static settings to each phone and everything works fine.

When I set the phones for DHCP, they never get DHCP though, (Everything on VLAN1 does)

When I enable the VLAN2 interface and assign an IP address, The phones then grab DHCP, however the Adtran becomes unreachable, I lose internet connectivity on my LAN, and can't pull an IP address on Computer.

!

!

! ADTRAN, Inc. OS version 17.08.02.00

! Boot ROM version 17.03.02.SB

! Platform: NetVanta 1238 PoE, part number 1700599G1

!

!

clock timezone -8

ip default-gateway 192.168.100.249 (This is the interface 1 on the Watchguad)

!

no auto-config

!

event-history on

no logging forwarding

no logging email

!

service password-encryption

!

!

!

!

aaa authentication login default local

!

!

!

!

no dot11ap access-point-control

!

!

!

ip dhcp-server excluded-address 192.168.100.1 192.168.100.100

ip dhcp-server excluded-address 192.168.100.200 192.168.100.255

ip dhcp-server excluded-address 192.168.99.1 192.168.99.199

ip dhcp-server excluded-address 192.168.99.220 192.168.99.255

!

ip dhcp-server pool "Data VLAN"

  network 192.168.100.0 255.255.255.0

  dns-server 75.75.76.76 75.75.75.75 8.8.8.8

  default-router 192.168.100.249 (This is the interface 1 on the Watchguad)

!

ip dhcp-server pool "Voice VLAN"

  network 192.168.99.0 255.255.255.0

  dns-server 75.75.75.75 8.8.8.8 75.75.76.76

  default-router 192.168.99.100 (This is the interface 2 on the Watchguad)

!

spanning-tree edgeport bpduguard default

!

!

!

vlan 1

  name "Default"

!

vlan 2

  name "VOICE_VLAN"

!

interface switchport 0/X (typical of all ports except switchport 2 which as only VLAN 2 membership)

  spanning-tree bpduguard enable

  spanning-tree edgeport

  no shutdown

  switchport voice vlan 2

!

!

!

interface vlan 1

  description DATA-VLAN

  ip address  192.168.100.222  255.255.255.0

  no shutdown

!

no ip tftp server

no ip tftp server overwrite

ip http server

ip http secure-server

no ip snmp agent

no ip ftp server

ip ftp server default-filesystem flash

no ip scp server

no ip sntp server

!

!

!

!

!

!

!

!

!

line con 0

  login local-userlist

!

line telnet 0 4

  login local-userlist

  password encrypted xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

  no shutdown

line ssh 0 4

  login local-userlist

  no shutdown

!

sntp server 192.168.99.10

!

!

!

!

end

Tags (2)
0 Kudos
1 Reply
Anonymous
Not applicable

Re: Having issues making 2 VLANS work on same 1238 switch.

I don't think this will work.  The old version (G1) of the 1238 doesn't support routing or IPs on more than one VLAN interface.  I don't think it can service a DHCP scope on a subnet for which it doesn't have an IP.  Certainly a renewal couldn't take place because that requires a unicast to the DHCP server's IP, which it doesn't have for VLAN 2.  Why don't you allow the Watchguard provide DHCP.  A switch isn't a great device for that - limited DHCP features.