Good afternoon all,
I'm hoping someone can help me here. I have an Adtran550 that was in place here at the company I work for. I set up Syslog on it and I am seeing some weird behavior. I have an RBS user term that goes out to an 824. I have a PRI that goes out to a PBX. When a call comes in and routes to the PBX I see the routing information (e.g. ANI XXXXXXXXXX / DNIS XXXX) on port 0|0 which is what I expect. When it goes out to the RBS port to the 824 I get nothing. I'm sure it's something stupid I'm missing in setup of the logging but I can't for the life of me figure out what it is. Right now I have the following settings:
System Controller Info
Chain Port │ Switchboard Info
SNMP │ Nx 56/64 Modules Minor
Event Logging │ T1 Module Info
Syslog Setup │ Ethernet Events Minor
Real Time Clock│ Frame Relay Minor
BONDING Config │ PPP Minor
│ ISDN Events Normal
│ ISDN L2 Messages Minor
│ ISDN L2 Formatted Minor
│ Call Control Messages Minor
│ Call Control IEs Minor
│ DP Outgoing Signalling Minor
│ Dprintf Minor
│ Firmware Update Minor
│ AIS Stack Minor
│ Resource Usage Minor
│ Bonding Minor
│ Voice Compression Minor
│ Circuit Backup Minor
│ E1 Module Normal
│ NxT1 HSSI Modules Minor
│ ModmMgmt Minor
│ Voice Cards Minor
│ BRI Normal
│ External Input Minor
