Question
How do I configure auto-link on my ASE Switch?
Answer
Currently auto-link is configurable only in the CLI of our ASE switches. The following 2 commands are all that's needed to get it up and running from global configuration mode:
!
auto-link
auto-link server primary <hostname | ip address> [port <port>]
!
Considerations:
- Only one entry is allowed for the primary n-Command MSP server. In addition, primary servers cannot be deleted if any secondary servers are configured.
- Multiple entries can be configured for secondary n-Command MSP servers. Duplicate entries are not allowed.
- The priority of secondary servers is determined by the order in which they were configured.
- By default, auto-link will use port 80 for HTTP, or port 443 for HTTPS, depending on the specified communication method.
- By default, the unit communicates with the server using HTTPS.
