is there a way to change the contact port for a sip trunk
I have an instance where ONE trunk is accepting calls for either of the defined trunks
eg a call routed to sip T02 is going to sip T01
Trunks are registered with distinct account/user info
The server is sending to the device on what it thinks is the appropriate channel/account
All calls coming into the device are always coming in on the first channel
I an thinking if the sip trunk source ports could be changed then the outbound calls would route to the proper channel, as the port would define the 'trunk'
Thoughts ????
--SIP Trunk Configuration --
voice trunk T11 type sip
description " SIP - Trunk1"
match ani "NXX-NXX-XXXX" substitute "1-NXX-NXX-XXXX"
sip-server primary *****.net
registrar primary *****.net
registrar threshold absolute 60
outbound-proxy primary ******.net
register 200250 auth-name "2000" password "AAAAAAAAAA"
codec-list voip both
authentication username "2000" password "AAAAAAAAAA"
!
voice trunk T12 type sip
description "Voiceway SIP - Trunk2"
match ani "NXX-NXX-XXXX" substitute "1-NXX-NXX-XXXX"
sip-server primary *****.net
registrar primary *****.net
registrar threshold absolute 60
outbound-proxy primary *****.net
register 200251 auth-name "3000" password "BBBBBBBBBB"
codec-list voip both
authentication username "3000" password "BBBBBBBBBB"
!
